GRF(1-29) raises a handful of sensible questions. This page answers them in order, starting with the fundamentals and moving to applications.
This page was last updated on 2025-09-17 and is reviewed periodically as new material appears.
Laboratory handling centers on minimizing exposure to water, heat and oxygen before use. Working solutions are typically prepared in sterile water or a mild buffer, and any residual particulate matter is removed by filtration. When the powder dissolves slowly, a small proportion of acetonitrile or dilute acetic acid is sometimes added as a co-solvent. Containers are kept sealed and desiccated between uses. Records of lot number, reconstitution date and storage conditions support later comparison of results across experiments.
Identity and purity are established with reversed phase high performance liquid chromatography coupled to mass spectrometry. The chromatographic step separates the target peptide from truncated sequences and deletion products, while the mass measurement confirms the expected molecular weight to within a fraction of a dalton. Because the two common variants differ by the presence of the linker, mass alone can distinguish them in the unconjugated state. Amino acid analysis and peptide mapping are used when sequence level confirmation is required.
Stability depends heavily on physical state. A lyophilized powder kept dry, desiccated, and shielded from light typically holds its integrity for months to years at minus twenty degrees Celsius, and longer at minus eighty. Once dissolved, the peptide becomes far more vulnerable, since peptide bond hydrolysis, oxidation of susceptible residues, and aggregation all proceed faster in solution. Buffers near neutral pH are generally gentler than strongly acidic or alkaline conditions. Repeated freeze-thaw cycles and exposure to air-liquid interfaces during vigorous mixing cause losses that are easy to overlook.
Verification matters because research peptides vary widely in quality. A certificate of analysis is only as reliable as the method behind it, and a single chromatographic trace reveals little about counter-ions, residual solvents, or water content. Independent laboratories commonly pair mass confirmation with chromatographic purity and, where relevant, quantify water along with acetate or trifluoroacetate content. Reported purity figures are not standardized across suppliers, so a stated value such as ninety-eight percent is not directly comparable unless the analytical method, column, and detection wavelength accompany it.
Characterization of this peptide relies on a small set of routine techniques. Reversed-phase high-performance liquid chromatography separates the target from truncated or oxidized by-products and yields a purity estimate when paired with ultraviolet detection near 214 nanometers. Mass spectrometry, either electrospray coupled to liquid chromatography or matrix-assisted laser desorption, confirms that the observed mass matches the value calculated for the expected sequence. Amino acid analysis, and enzymatic digestion followed by fragment mapping, are used when the sequence itself rather than the mass requires verification.
| Property | Value | Notes |
|---|---|---|
| Appearance | White to off white powder | Typical lyophilized form |
| Water solubility | Soluble | May need a small organic co-solvent |
| Purity assessment | Chromatographic peak area | Most certificates report a percentage figure |
| Storage temperature | Minus 20 C or lower | Dry, dark, sealed container |
| Identity check | Electrospray mass spectrometry | Compared against theoretical mass |
Research material is normally supplied as a freeze-dried powder in sealed vials. In that state the peptide is comparatively robust, but prolonged exposure to warmth, moisture, or light accelerates degradation. Storage at minus twenty degrees Celsius or lower, with desiccant and protection from light, is the commonly described practice. Vials should be allowed to reach room temperature before opening to limit condensation on the powder. Moisture uptake during handling is a recognized source of variability in later measurements.
Reconstitution is typically performed with sterile water or bacteriostatic water, added slowly against the vial wall. The resulting solution should be clear and colorless; cloudiness or visible particles suggest a problem with the material or the diluent. Once in solution, the peptide is less stable than the dry powder. Refrigerated storage at two to eight degrees Celsius is common for short-term holding, while freezing aliquots is described for longer periods.
CJC-1295 is a synthetic peptide analog of growth hormone-releasing hormone, constructed on the 29-amino-acid fragment designated GRF(1-29). The name began as an internal development code during the 1990s and later spread through research supply catalogs and discussion forums. The molecule does not occur in nature; its sequence is engineered rather than isolated from tissue. Two related compounds are sold under this single label, and they differ by one appended chemical group that strongly influences how long the peptide remains in circulation.
The dividing feature between the two forms is a maleimide-based drug affinity complex, abbreviated DAC. In the DAC-bearing version, a linker attaches the peptide to serum albumin after administration, and that association slows removal from plasma. The version lacking DAC appears in catalogs as MOD GRF(1-29) or tetrasubstituted GRF(1-29). Because informal writing treats both as one item, comparisons drawn from such sources routinely blend measurements taken from two molecules with substantially different behavior.
Four amino acid substitutions separate the modified backbone from the parent GRF(1-29) sequence. These changes reduce recognition by dipeptidyl peptidase IV and related proteases, extending the interval before degradation. Development work in this area sought longer-acting GHRH analogs for endocrine investigation. Published descriptions treat the substitution set as a defining property of the core sequence, while the albumin-binding linker is described separately as an optional addition to that same backbone.
CJC-1295 is the name used for a synthetic peptide modeled on growth hormone-releasing hormone, the hypothalamic signal that prompts the pituitary to release growth hormone. The compound was described by a Canadian drug discovery company in the mid-2000s as a long-acting research tool. Two closely related molecules share the name in practice: one carries a drug affinity complex, or DAC, group, and one does not. The distinction matters because the two behave differently in circulation.
The peptide backbone corresponds to GRF(1-29), the first 29 residues of native growth hormone-releasing hormone, which retains most of the receptor-activating activity of the full-length molecule. Four substitutions distinguish the analog from the natural sequence: D-alanine at position 2, glutamine at position 8, alanine at position 15, and leucine at position 27. These changes slow cleavage by dipeptidyl peptidase IV, the enzyme that degrades native hormone in plasma within minutes. The outcome is improved enzymatic stability combined with a still brief residence time when no additional modification is present.
BC Research Inc. is a privately owned Canadian process technology incubator, specializing in custom research, process development and technology commercialization. Headquartered in Vancouver, British Columbia, BC Research operates primarily from their Technology Commercialization and Innovation Centre on Mitchell Island in the Vancouver suburb of Richmond. This 40,000 sq-ft facility includes a 28,000 sq-ft pilot plant development area, 2,500 sq-ft laboratory space, 9,000 sq-ft of office space, as well as a small machine shop and fenced outdoor piloting space. Technologies are scaled up from concept to pilot or demonstration scale in preparation for commercialization. Engineering support is provided by sister companies NORAM Engineering and Constructors Ltd. Previously, BC Research was located at the BC Research and Innovation Complex at the south end of the University of British Columbia campus. This facility closed in November 2007. The company specialized in consulting and applied research and development in the area of plant biotechnology and environment, health and safety, process and analysis, transportation and ship dynamics.
Many different amino acid side chains have been described as ADP-ribose acceptors. From a chemical perspective, this modification represents protein glycosylation: the transfer of ADP-ribose occurs onto amino acid side chains with a nucleophilic oxygen, nitrogen, or sulfur, resulting in N-, O-, or S-glycosidic linkage to the ribose of the ADP-ribose. Originally, acidic amino acids (glutamate and aspartate) were described as the main sites of ADP-ribosylation. However, many other ADP-ribose acceptor sites such as serine, arginine, cysteine, lysine, diphthamide, phosphoserine, and asparagine have been identified in subsequent works.
Kunitz-type serine protease inhibitor APEKTx1 is a peptide toxin derived from the sea anemone Anthopleura elegantissima. This toxin has a dual function, acting both as a serine protease inhibitor and as a selective and potent pore blocker of Kv1.1, a shaker related voltage-gated potassium channel. APEKTx1 is a potent toxin purified from the sea anemone A. elegantissima. Besides APEKTx1, other toxins such as APETx1, APE1-1, APE1-2, APE2-2, ApC, and APETx2 have been identified in A. elegantissima. This peptide has 65 amino acids crosslinked by 3 disulphide bridges, and has a molecular mass of 7475 Da. It acts as a monomer. The toxin belongs to the type 2 sea anemone peptides targeting voltage-gated K channels. Other type 2 toxins are the kalicludines from Anemonia sulcata, which selectively block Kv1.2 channels, and SHTX II from Stichodactyla haddoni. Structural homology is also shared with the basic pancreatic trypsin inhibitor (BPTI), a very potent Kunitz-type protease inhibitor, and dendrotoxins (DTX I and α-DTX), which are potent inhibitors of voltage-gated potassium channels.
The positive transcription elongation factor, P-TEFb, is a multiprotein complex that plays an essential role in the regulation of transcription by RNA polymerase II (Pol II) in eukaryotes. Immediately following initiation Pol II becomes trapped in promoter proximal paused positions on the majority of human genes (Figure 1). P-TEFb is a cyclin dependent kinase that can phosphorylate the DRB sensitivity inducing factor (DSIF) and negative elongation factor (NELF), as well as the carboxyl terminal domain of the large subunit of Pol II and this causes the transition into productive elongation leading to the synthesis of mRNAs. P-TEFb is regulated in part by a reversible association with the 7SK snRNP. Treatment of cells with the P-TEFb inhibitors DRB or flavopidirol leads to loss of mRNA production and ultimately cell death. P-TEFb was identified and purified as a factor needed for the generation of long run-off transcripts using an in vitro transcription system derived from Drosophila cells.
Sources: en.wikipedia.org
The localization of ADAM17 is speculated to be an important determinant of shedding activity. TNF-α processing has classically been understood to occur in the trans-Golgi network, and be closely connected to transport of soluble TNF-α to the cell surface. Shedding is also associated with clustering of ADAM17 with its substrate, membrane bound TNF, in lipid rafts. The overall process is called substrate presentation and regulated by cholesterol. Research also suggests that the majority of mature, endogenous ADAM17 may be localized to a perinuclear compartment, with only a small amount of TACE being present on the cell surface. The localization of mature ADAM17 to a perinuclear compartment, therefore, raises the possibility that ADAM17-mediated ectodomain shedding may also occur in the intracellular environment, in contrast with the conventional model. Functional ADAM17 has been documented to be ubiquitously expressed in the human colon, with increased activity in the colonic mucosa of patients with ulcerative colitis, a main form of inflammatory bowel disease. Other experiments have also suggested that expression of ADAM17 may be inhibited by ethanol.
Aluminon, the triammonium salt of aurintricarboxylic acid, is a dye often used to detect the presence of the aluminium ion in an aqueous solution. Aluminon forms a red complex salt in combination with Al3+. In addition to its use in qualitative inorganic analysis, aluminon has applications in pigment production. It forms brilliantly colored lake pigments with many metals. The pigments are red in combination with Be2+ and Ga3+. The pigment is deep purple or reddish-brown in combination with Fe3+. Color of a particular pigment in acidic solutions may change: aluminon and Sc3+ form red pigments if the solution is acidic, but otherwise the solutions are colorless. Aluminon is prepared by reacting sodium nitrite with salicylic acid, adding formaldehyde, then treating with ammonia. Analytical chemistry Colorimetry
Acetyl phosphate (AcP), a precursor to ATP, can readily be synthesized at modest yields from thioacetate in pH 7 and 20 °C and pH 8 and 50 °C, although acetyl phosphate is less stable in warmer temperatures and alkaline conditions than in cooler and acidic to neutral conditions. It is unable to promote polymerization of ribonucleotides and amino acids and was only capable of phosphorylation of organic compounds. It was shown that it can promote aggregation and stabilization of AMP in the presence of Na+, aggregation of nucleotides could promote polymerization above 75 °C in the absence of Na+. It is possible that polymerization promoted by AcP could occur at mineral surfaces. It was shown that ADP can only be phosphorylated to ATP by AcP and other nucleoside triphosphates were not phosphorylated by AcP. This might explain why all lifeforms use ATP to drive biochemical reactions.
Sources: en.wikipedia.org
The mass difference from the linker is large enough for routine detection by mass spectrometry. The unconjugated form gives a single sharp signal at its expected weight. Material that has already reacted with albumin shows a much higher mass and a broadened chromatographic peak.
Yes. Degradation proceeds faster once the powder is dissolved, especially at room temperature or after multiple freeze and thaw cycles. Working solutions are often aliquoted to avoid repeated handling. Lyophilized powder held cold and dry retains its properties far longer.
Truncated sequences, oxidized residues and aggregated forms can all elute near the main peak. Reversed phase chromatography resolves many of these species, so the number of peaks is a useful indicator of synthesis quality. A single peak does not by itself prove correct sequence, which is why mass confirmation is paired with it.
Mass spectrometry establishes whether the observed molecular weight matches the calculated sequence mass. Chromatographic retention and fragment mapping add further confidence about sequence and composition. A single technique alone is rarely treated as sufficient evidence of identity.